G-Z7J688LBX2 G-Z7J688LBX2
top of page

Stop steering box flex at the source.

 

Bigger tires put a lot of extra load on your Jeep’s steering. Every hard turn, every ledge and every rut pushes that load through the steering box, its mounts and the frame. Over time that flex shows up as vague steering, wander and, in the worst cases, fatigue cracks around the box mount. Most braces only tie the box to the frame. The Torrix Sector Shaft Brace goes further and stiffens the entire load path, from the steering gear through the sector shaft, crossmember and frame.

Engineered, not guessed
Torrix designed this brace using finite element analysis (FEA). The design was modeled and stress-tested digitally to find where the steering system flexes and fails, then reinforced exactly there. Every brace is made in the USA.

 

How it works

  • Supports the sector shaft with a bearing. A bearing in a machined housing supports the end of the sector shaft instead of a bushing. That keeps the shaft from deflecting under load, which is where a lot of steering slop starts.
  • Ties the steering box to the crossmember. A 3/16" steel gusset locks the steering box to the Jeep’s crossmember, so the box can’t twist on its mounts.
  • Reinforces the frame. A dedicated frame bracket strengthens the mounting area, spreading the load out and protecting the frame from fatigue.

 

Why it matters

  • Tighter, more precise steering on the road and the trail
  • Less flex in the steering box and its mounts
  • Added protection against fatigue cracking, especially on Jeeps running larger tires
  • Peace of mind for hard-wheeled and heavily built rigs

Fitment

  • Jeep Wrangler JL (2-door)
  • Jeep Wrangler Unlimited JLU (4-door)
  • Jeep Gladiator JT

 

Best Off-Road Premier Product
The Torrix Sector Shaft Brace is part of the Best Off-Road Premier Products program, a short, hand-picked list of products we trust enough to run on our own rigs. Products earn a spot on quality, engineering, performance and manufacturer support. When you buy a Premier product from Best Off-Road and have our shop install it, we stand behind it: if it fails under the manufacturer’s standard warranty, we cover the labor to replace it. Learn more about the Premier Products program.

 

Professional installation available at Best Off-Road. Our technicians can install your sector shaft brace and check your steering system while it’s on the lift, so everything is tight, aligned and ready for the trail.

Torrix | Sector Shaft Brace | Jeep Wrangler JL, JLU & Gladiator JT

$395.00Price
Excluding Sales Tax
Quantity
    bottom of page